Specifications for ActiveLED AC and DC Powered LED Drivers

Ringdale ActiveLED® makes a unique range of Intelligent Constant Current LED Driver Power Supplies covered by two significant Patents (pending) that cover functionality and communication signalling and protocol. ActiveLED also manufactures as a highly competitive non-intelligent power supply for wet applications and fixed voltage use.

Intelligent AC Powered LED Drivers

Intelligent AC Input LED Driver with 48V DC Input Option

• All voltage 100..277V AC 50/60Hz
• Active Power Factor Correction achieving >0.95 typical 0.99
• Total Harmonic Distortion <20%, typical less than 10%
• Power Conversion Efficiency AC Input to LED Power >87%, typical 91%, 48V DC input to LED >95%, typical 98%
• UL1310 Class II device (100W version) and cUL Listed: E332932
• 1, 2, 3 or 4 output versions that can drive LED modules programmable from 300mA to 1400mA per channel (maximum power output per channel is 30 Watt)
• Usable as RGB-W Driver all 4 outputs individually controllable via EDSaP protocol
• Output Short Circuit Protection

Intelligent AC and DC LED Driver Features

• Standby Power (no external devices connected 0.3 watts - 0.5 Watts with one digital dimmer connected
• No loss for digital dimming
• Guranteed dimming levels for set dimming steps, 0..100% dimming in 2% steps
• Each Power Supply is a dimming repeater and refreshes the dimming signal, an unlimited number of lights can be connected together in a daisy-chain and be operated off one digital dimmer achieving identical dimming levels
• 0..10V dimming input for connection to a legacy building management system
• Motion sensor input (requires ActiveLED 3 wire motion sensor
• Daylight phototransistor input (requires Ringdale 2 wire daylight sensor)
• Connects to a number of EDSaP compliant digital motion sensors (up to 8 can be daisy chained to cover larger areas)
• Dimming totally consistent over all channels and all power supplies
• DMX512 each channel individually controllable when used with ActiveLED LSM2-DMX device
• Programamble through EDSaP port using ActiveLED USB to EDSaP dongle and Windows OS based PC, Laptop or Tablet based application software
• 3 timeouts programmable in time and light levels
• OFF level and ON level programmable and stored in fixture
• Master PSU programmable allows 0..10V input, Motion sensor and daylight sensor to be trnasmitted via EDSaP port to downstream fixtures
• Emergency Light Mode (will dim to 50% when power fails) or 48V DC Permanent Operation
• 48V-DC Battery Input allows connection of 3 hour ActiveLED Battery Pack
• Ready to run totally off 48V DC
• Functionality is programmable via EDSaP port and application software
• IR programming and control module allows light levels and mode switching as well as programming using IR dongle and application software for Windows OS based PC, Laptop or Tablet

Active Power Factor Corrected AC Powered LED Driver

• Class II isolated device for the following Voltages
• 100...277V AC - 50/60Hz
• Output programmable between 300mA and 900mA
• maximum LED drive capability 30 Watt
• Suitable for wet locations when fully potted
• Power factor > 0.92, typical 0.99
• Efficiency > 87%, typical 91%
• THD <20% , typical 10%
• Programmable functionality
• motion
• dusk to dawn
• touch button dimmer
• 0...10V dimming
• on/off

DC Only LED Drivers

Intelligent DC-Only Powered Drivers 40V-DC to 100V-DC Input

• 4 LED driver channels - can drive up to 112 Watts of LEDs
• all features as above "Intelligent AC and DC LED Driver Features"
• Efficiency > 96%

Intelligent DC-Only Powered Drivers 10V-DC to 100V-DC Input

• 1 LED driver channel - can drive up to 36 Watts of LEDs
• all features as above "Intelligent AC and DC LED Driver Features"
• Efficiency > 96% above 35 Volt input voltage, 92% at 12 Volt input voltage

On/Off Current Programmable DC-Only Powered Drivers 10V..100V-DC Input

• 10V-DC to 100V-DC Input Voltage
• Output programmable between 300mA and 900mA
• maximum LED drive capability 33 Watts
• Efficiency > 96% above 35 Volt input voltage, 92% at 12 Volt input voltage
• On / Off functionality - NOT DIMMABLE