Call for Information
 | +1-833-850-7097 | ||
 | +44 (0)844 264 1570 | ||
|
|
|||
| +1-833-850-7097 | ||
| +44 (0)844 264 1570 | ||
|
|
|||
The Emergency Battery Backup Unit (EBBU-U) is specifically designed to provide at least three hours of emergency battery backup power to any ActiveLED® Light Fixture, suitable for indoor use
The ActiveLED® EBB Unit is managed, monitored and charged by the Power Supply in the ActiveLED fixture to ensure that the battery is kept charged in case of a power failure.
Should the AC power to the ActiveLED fixture be disconnected or fail for any reason, the fixture will continue to operate on battery power and will automatically adjust its output level to an emergency power-saving mode to ensure operation for at least three hours.
When the AC power is restored to the ActiveLED fixture, the Power Supply will trickle-charge the emergency battery and thereafter maintain the battery at its maximum capacity.
The EBB Unit consists of a sealed 48 VDC lead-acid battery pack and electronics in a self-contained housing that is cable-connected to an ActiveLED light fixture.
The prerequisite for the EBB-U is an ActiveLED® light fixture with a power supply that has the Battery Backup (BBB) support option.
LED Status Indicator
A single LED is visible from the outside of the EBBU-U housing to indicate the status of the battery, as follows:
| VISIBLE LED | LED FUNCTIONAL DESCRIPTION |
| Solid Red LED | Battery is in operation, powering the attached light fixture. |
| Flashing Red LED | Battery condition is too low to power the attached light fixture. |
| Solid Green LED | Battery condition is good and is not in operation, it is being trickle-charged by the power supply of the light fixture. |
ActiveLED® Technology
Ringdale uses the latest in energy efficient LEDs and LED modules producing equivalent or greater light output than fluorescent (HID) fixtures. Our state-of-the-art electronics monitor current and temperature of the substrate to assure maximum performance under the prevailing environmental conditions and a Lumen Lifetime of 90,000 hours (90% Luminous Flux).
ActiveLED® Warranties
We provide mechanically robust outdoor lighting systems; our warranties are 10 years on LED elements, fixtures and power supplies /drivers, and 3 years on this Emergency Battery Backup Unit.
Ringdale is an ISO 9001:2000 company, registered under BSI certificate FM-1880. Ringdale provides products of the highest quality designed and manufactured in Texas, USA and in the United Kingdom.
ActiveLED® EBBU-U Part Number: 00-27-0618-0000
| Dimensions: | • 14.2” (L) x 5.6” (W) x 2.4 (H) (36.0 x 14.2 x 6.1 cm) • Overall length including mounting tabs, 15.7" (39.8 cm) |
|---|---|
| Weight: | 11.4 lbs, 5.1 Kg |
| Battery Pack Details: | 48 Volt DC sealed lead-acid deep-cycle |
| Battery Endurance: | At least three hours from a fully-charged state |
| Connection to LED Light: | Included - a 5 foot long cable, suitable for indoors use only |
| Prerequisite: | ActiveLED fixture with the EBB option enabled |
| Suitability: | • For indoor installation. • If installed outdoors, will require weatherproof cable 07-06180002 and suitable NEMA weatherproof enclosure |
| Warranty: Part Number: | 3 years 00-27-0618-0000 |
Caution! All specifications published herein are subject to change without notice. See website ActiveLED.com for Terms and Conditions of use of the website and the information provided herein. See Ringdale website on www.ringdale-technology.com for Terms and Condtions of Sale and Service.
| +1-833-850-7097 |
| +44 (0)844 264 1570 |