Call for Information
 | +1-833-850-7097 | ||
 | +44 (0)844 264 1570 | ||
|
|
|||
| +1-833-850-7097 | ||
| +44 (0)844 264 1570 | ||
|
|
|||
The Emergency Battery Backup Unit (EBBU) is specifically designed to provide at least three hours of emergency battery backup power to any ActiveLED® EBB readyr Light Fixture
The ActiveLED® EBB Unit (EBBU) includes 52 Volt DC Battery Pack (LiFePO4) and Battery Charger that monitors and charges the battery as required.
Should the AC power to the Fixture/Power Supply be disconnected or fail for any reason, the attached fixture will continue to operate on battery power and will automatically adjust its output level to an emergency power-saving mode to ensure operation for at least three hours.
When the AC power is restored to the EBBU, it will trickle-charge the emergency battery and thereafter maintain the battery at its maximum capacity.
The EBB Unit consists of a LiFePO4 battery pack and Battery Charger in a self-contained housing that is cable-connected to an ActiveLED light fixture.
The prerequisite for the EBB is a "EBB ready" ActiveLED® light fixture with an EBB-ready power supply that is then cable-connected to the EBBU via a 4-conductor low-voltage cable (not supplied).
LED Status Indicator
A single LED is visible from the outside of the EBBU unit housing to indicate the status of the battery pack, as follows:
| VISIBLE LED | LED FUNCTIONAL DESCRIPTION |
| Solid Red LED | Battery is in operation, powering the attached light fixture. |
| Flashing Red LED | Battery condition is too low to power the attached light fixture. |
| Solid Green LED | Battery condition is good and is not in operation, it is being trickle-charged by the EBB-ready fixture or power supply. |
ActiveLED® Technology
Ringdale uses the latest in energy efficient LEDs and LED modules producing equivalent or greater light output than fluorescent (HID) fixtures. Our state-of-the-art electronics monitor current and temperature of the substrate to assure maximum performance under the prevailing environmental conditions and a Lumen Lifetime of 90,000 hours (90% Luminous Flux).
ActiveLED® Warranties
We provide mechanically robust outdoor lighting systems; our warranties are 10 years on LED elements, fixtures and power supplies / drivers, 10 years on this Emergency Battery Backup Unit.
Ringdale is an ISO 9001:2015 company. Ringdale provides products of the highest quality designed and manufactured in Texas, USA and in the United Kingdom.
ActiveLED® EBBU Part Number: EBBU-U-LIF-32180
Interconnecting cable between EBBU and EBB ready power supply or fixture: 07-06180002 - 25', 07-06180002 - 2', for troffers 07-06180103 - 2' with LED
Related products:
Emergency Battery Backup Unit Troffers
EBBU-N-LIF-32180A
Emergency Battery Backup Unit for HBR/Chain
EBBU-N-LIF-32180A-1
EBBU-N-LIF-32180A-2
| Dimensions: | • 11.7” (L) x 4.8” (W) x 2.8 (H) (29.7 x 12.1 x 7.2 cm) |
|---|---|
| Weight: | 4.5 lbs, 2.1 Kg |
| Battery Pack Details: | 52 Volt DC LiFePO4 UL Listed LiFePO4 Batteries |
| Battery Endurance: | At least three hours from a fully-charged state |
| Connection to LED Light: | 2-Conductor 22 SWG low-voltage cable (not included), suitable for indoors use only |
| Prerequisite: | ActiveLED or other LED fixture without an ActiveLED EBB-ready power supply / driver. |
| Suitability: | • For indoor installation. • If installed outdoors, will require weatherproof cable 07-06180002 and suitable NEMA weatherproof enclosure |
| Warranty: Part Number: | 10 years EBBU-U-LIF-32180 |
Caution! All specifications published herein are subject to change without notice. See website ActiveLED.com for Terms and Conditions of use of the website and the information provided herein. See Ringdale website on www.ringdale-technology.com for Terms and Condtions of Sale and Service.
| +1-833-850-7097 |
| +44 (0)844 264 1570 |