Call for Information
 | +1-833-850-7097 | ||
 | +44 (0)844 264 1570 | ||
|
|
|||
| +1-833-850-7097 | ||
| +44 (0)844 264 1570 | ||
|
|
|||
Uses Smart Technology to automatically activate relays or contactors to turn light fixtures off or on in an occupancy zone or lighting network. Optionally can be configured with either ActiveLED® LightSpace Manager® or Ambient Light Sensor where natural daylight is to be used to activate the relay or contactor(s).
LightSpace® Relay Controller is a modular system that can be configured for differing applications where there is a need to turn the light fixtures in a lighting zone or circuit off or on by activating one or many AC Contactors. Since the circuit is turned off or on by activating or deactivating contactors, the light fixtures can be LED or bulb technology and from any vendor, including ActiveLED®.
Dependent upon the lighting controls application, the LightSpace Relay Controller can optionally be configured with the Ambient Light Sensor (ALS) and/or the LightSpace Manager (LSM) to take power management to the next level of automation.
When configured with the Ambient Light Sensor, the Relay Controller is in effect an Astronomical Twilight Detector that uses ambient light levels to sense twilight and turn light fixtures off or on accordingly.
When configured with the LightSpace Manager, the Relay Controller uses sensed motion to turn light fixtures off and on, thereby saving energy when no motion is sensed.
Regardless of the technology and regardless of the vendor, the LightSpace Relay Controller triggers Contactors to turn these attached fixtures off or on. Additionally, any ActiveLED fixtures can optionally be connected together in a managed lighting zone to take advantage of the ActiveLED dimming architecture where these fixtures can be dimmed anywhere from 100% to zero in 2% increments, allowing the automatic adjustment of fixture light levels and energy consumption to suit the application needs.
ActiveLED® Occupancy Zone / Lighting "Network"
A group of controlled ActiveLED light fixtures can be interconnected to form an occupancy zone or lighting "network" and the number of ActiveLED lighting fixtures that can be controlled from a single LightSpace Relay Controller is virtually limitless.
Any attached ActiveLED fixture can be turned on or off or can be dimmed to predetermined levels based on the ambient light levels or detected motion.
Each interconnected ActiveLED fixture / power supply relays the ALS settings to the next connected fixture via a 4-wire RJ11 / RJ12 communications cable, giving unlimited flexibility in managing the defined ActiveLED lighting occupancy zone / lighting "network".
LightSpace® Relay Controller Overview
To accommodate as many configuration options as possible, the LightSpace Relay Controller is modular by design.
It can be configured with either an Ambient Light Sensor (Astronomical Twilight Detector) or a Motion Sensor and use either ambient lighting or motion to turn light fixtures off and on.
The integrated DIN Rail accommodates one or two Contactors specified for AC line voltages up to 480 VAC.
In addition to powering off and on any attached light fixtures (ActiveLED or any other technology / vendor), any attached ActiveLED fixtures can optionally be dimmed down to a preset level, rather than be powered all the way to off.
Ambient Light Sensor Operating Modes
The ALS has five operating modes, which may be selected by pressing the left touch button, as follows:
|
MODE |
DESCRIPTION |
AUT |
In Automatic Mode the ALS will monitor the ambient light readings of the room or public area and automatically adjust the light levels of the attached ActiveLED fixtures to maintain the desired pre-programmed ambient light level. |
CAL |
Calibration Mode is the same as Auto Mode except the ALS displays its current light level reading (calibration). Calibration mode is also helpful when initially programming (calibrating) the ALS using its built-in light meter to provide the desired High and Low ambient light levels. |
D2D |
In D2D (Dusk-to-Dawn) mode the ALS becomes an Astronomical Twilight Detector and will activate the Contactors to turn the attached lighting fixtures off and on at the beginning and end of each day, while automatically adjusting for the seasons. |
On |
On Mode takes the ALS out of Automatic Mode and allows the light levels of the ActiveLED fixtures to be manually adjusted up or down in 2% increments from 0 (off) to 100% using the capacitive touch buttons. |
Off |
Turns the attached ActiveLED lights off (or down to the configured minimum light level), while the background of the ALS is lit to facilitate locating it in low ambient light levels. |
ActiveLED® Lighting Technology
Ringdale uses the latest in energy efficient LEDs and LED modules producing equivalent or greater light output than fluorescent (HID) fixtures. Our state-of-the-art electronics monitor current and temperature of the substrate to assure maximum performance under the prevailing environmental conditions and a Lumen Lifetime of 90,000 hours (90% Luminous Flux).
ActiveLED® Warranties
We provide mechanically robust LED lighting systems; our warranties are 10 years on LED elements, Fixtures, Power Supplies / Drivers and this Relay Controller.
Ringdale is an ISO 9001:2000 company, registered under BSI certificate FM-1880. Ringdale provides products of the highest quality designed and manufactured in Texas and in the United Kingdom.
LightSpace® Relay Controller Part Numbers:
00-27-0665-2005, Basic Configuration
00-27-0665-2000, Configured with an ALS Ambient Light Sensor
| Overall Dimensions: | 20.3" x 1.3" x 16.9" x 4.5" Deep (43.0 x 51.6 x 11.4 cm). |
|---|---|
| Weight: | TBD |
| Connection to optional Digital Sensors: | 6-conductor flat ribbon or UTP cable: • 6-pin RJ-12 connectors |
| Connection to ActiveLED Light: | 6-conductor flat ribbon or UTP cable: • 6-pin RJ-12 connectors |
| Inter-Connection, LED to LED Fixture: | 4-conductor flat ribbon or UTP cable: • 4-pin RJ-11 connector one end • 6-pin RJ-12 connector the other end |
| Power: | Powered by a separate 110-277 VAC line |
| Regulatory Compliance: | CE# 1616-10A |
| Part Numbers: | 00-27-0665-2000 with ALS 00-27-0665-2005 Base Configuration |
Caution! All specifications published herein are subject to change without notice. See website ActiveLED.com for Terms and Conditions of use of the website and the information provided herein. See Ringdale website on www.ringdale-technology.com for Terms and Condtions of Sale and Service.
| +1-833-850-7097 |
| +44 (0)844 264 1570 |